Захтеви за дизајн цртежа склопа за убризгавање калупа

- Apr 09, 2020-


1. The assembly drawing of injection mold needs to have a completely accurate plastic part drawing, and sometimes the plastic part drawing needs to be properly corrected. If necessary demolding angle is added, the tolerance shall be converted if there is tolerance requirement, and generally, the shape that is favorable for adding glue in the future shall be considered to be corrected.

2. When converting the plastic part drawing to the cavity drawing in the mold base, first multiply the shrinkage by 1, and then make the mirror image processing (reflection). At the same time, pay attention not to misplace the cavity drawing of the moving model.

Када уређујете положај, водите рачуна да податак цртежа за шупљину буде цели број у односу на датум базе калупа.

3. Број шупљине мора бити наведен на мулти - цртежу калупа за шупљину, а одговарајући број такође ће бити наведен на траци за вишеструки - калуп за шупљину као што је зупчаник.

Фину структуру на цртежу склопа калупа треба повећати.

4. The layout plan of the inclined push rod of the injection mold (including the bottom sliding seat) shall be expressed clearly, and the size shall be marked clearly, so as to facilitate processing and prevent interference with other parts.

5. The complete assembly drawing of injection mold www.sdzhusu.com shall be able to express enough drawings of mold structure; complete and accurate dimensions; list of push numbers; part number, title block, parts list, and modification block; axonometric diagram of cooling water line, and exhaust diagram in special cases; various hole positions and their codes, common hole positions and their codes


Par:Plastic mold DESIGN & ENGINEERING Sledeći:Принцип деловања калупа